Everpure E-10, 10" Coarse Prefilter System

E-Series prefilters (previously clear - now black) are designed to increase the life of Everpure carbon water filters in areas with an unusual amount of dirt in the water. With a 10 micron (nominal) rating, the Everpure prefilter traps much of the dirt which contributes to scale buildup in ice makers, and clogs the delicate orifices of other water-using equipment.

The standard EC110 Cartridge is provided with each Model E10 Filter. It is rated at 10 microns nominally and has a more-than-adequate life when filtering water with "normal" or average dirt loads.

APPLICATIONS AND FEATURES

• General purpose coarse filtration
• Pre-filtration for fine filters
• Reduces dirt, rust, oxidized iron sulfide
• High-strength materials

FILTER SPECIFICATIONS

Head has 3/4" female pipe threads (also includes reduction adaptor fittings for 1/2" FNPT or 3/8" FNPT) for inlet and outlet pipe connections: it is constructed of polypropylene. Dirt/Rust cartridges are graded density spool type, with synthetic materials.

Capacity: Varies

Maximum Flow: 6.0 gpm (22.7 Lpm)

Qty. per Case: 1

Working Pressure: 10 - 125 psi (0.7 – 8.6 bar), non-shock

Max. Temp: 35 - 100°F (2 - 38°C)

Inlet Outlet Size: 3/4”

Operating Weight: 6 lbs

Shipping Weight: 4 lbs

H: 12.44” W: 5.16 D: 5.5” 

INSTALLATION TIPS

Choose a mounting location suitable to support the full weight of the system when operating. Make sure to properly lubricate o-ring prior to use. Use 3/4" water line (optional reducer bushings included). Install vertically with bowl hanging down. Allow 2-1 ⁄2" (6.35 cm) clearance below the cartridge for easy cartridge replacement.

IMPORTANT: Always use a NSF approved pipe dope or PTFE plumbers tape at all thread connections.